Audio professionals looking for I/O expansion for Sonicview digital mixing consoles will be impressed with the TASCAM SB-16D, 16-in/16-out Dante stage box and exclusive audio interface 32bit/96kHz built-in setup. Class 1 AD/DA converters and HDIA (High Definition Instrumentation Architecture) microphone preamps, great for touring bands, concert halls, clubs, bars, special events, company meetings and rental homes.
The Stagebox includes 16 XLR inputs and 16 XLR outputs plus master/slave Dante I/O and DB-25 GPIO connectors for relay and event applications. Control the SB-16D with the TASCAM IO Control app or with Sonicview series mixers. The stage box can be used on the floor, stacked, or stored in a standard 19" (3 RU) rack case.The SB-16D comes with a mounting kit and mounting hardware.
Offering the same performance and hardware quality as Sonicview live and recording mixers, the TASCAM SB-16D 16-input/16-output networked stage box offers all the benefits of Dante networking, combined with seamless integration with the Sonicview mixer. The stagebox can be used as a floor-standing or rack-mounted stagebox, and multiple stageboxes can be used simultaneously in a Dante network.
Tascam SB-16D Features
- 16-Ins &16-Outs, Dante Analog Converter
- TASCAM IO Control Software
- Use Standalone or with Sonicview Mixers
- 16 XLR Mic/Line Input Channels
- 16 XLR Bus / Outputs
- Dante Domain Manager Support
- AES67 Interoperability
- 96 kHz / 32-Bit AD/DA Converters
- Floor Installation and 3 RU Rackmount
- Includes Rack Kit and Mounting Hardware
- Compatibility
- TASCAM Viewsonic 16XP
- TASCAM Viewsonic 24XP
- Audio Characteristics
- Microphone Amplifier EIN (Input Conversion Noise): Below -128 dBu
- Distortion Factor: 0.002% or Less (Mic/Line → Dante, +4 dBu Input, Pad = Trim Minimum, JEITA
- 002% or Less (Dante → Line Out, 0 dBFS Output, JEITA)
- Frequency Characteristics
- 20 Hz to 20 kHz: +0 dB, -0.5 dB (48 kHz) (Mic/Line) → Line Out, JEITA
- 20 Hz to 40 kHz: +0 dB, -1.0 dB (96 kHz) (Mic/Line) → Line Out, JEITA
- 20 Hz to 20 kHz: +0 dB, -0.5 dB (48 kHz) (Dante In) → Line Out, JEITA
- 20 Hz to 40 kHz: +0 dB, -1.0 dB (96 kHz) (Dante In) → Line Out, JEITA
- Crosstalk: 100 dB or More (Mic/Line → Line Out, 1 kHz Sine Wave, JEITA
- Dynamic Range: 110 dB or More (Mic/Line → Dante, Pad=off, Trim Minimum, D.Ref= -20 dBFS, JEITA
- 111 dB or More (Dante → Line Out, Sampling Frequency: 48 kHz)
- 112 dB or More (Dante → Line Out, Sampling Frequency: 96 kHz )
- Audio I/O
- 16 x XLR 3-Pin Line/Mic Input
- 16 x XLR 3-Pin Line Output
- Analog Audio Inputs
- Mic/Line Input 1-16 Channels
- Connector: XLR-3-31 Equivalent (1: GND, 2: HOT, 3: COLD)
- Input Impedance: 5.0 Kilohms or More
- Maximum Input Level: +32 dBu (Trim Minimum, Pad: On), +12 dBu (Trim Minimum, Pad: Off)
- Minimum Input Level: -42 dBu (Trim Max, Pad: On), -62 dBu (Trim Max, PAD: Off)
- Phantom Power: +48V Supply Possible
- Analog Audio Outputs
- Line Output: 1-16 Channels
- Connector: XLR-3-32 Equivalent (1: GND, 2: HOT, 3: COLD)
- Specified Output Level: +6 dBu (D.Ref: -9 dBFS)
- +4 dBu (D.Ref: -14 dBFS, -16 dBFS)
- +4 dBu or 0 dBu (D.Ref: -18 dBFS, -20 dBFS)
- Maximum Output Level: +15 dBu (D.ref: -9 dBFS, A.ref: +6 dBu)
- +18 dBu (D.Ref: -14 dBFS, A.Ref: +4 dBu)
- +20 dBu (D.Ref: -16 dBFS, A.Ref: +4 dBu)
- +18 dBu (D.Ref: -18 dBFS, A.Ref: 0 dBu)
- +20dBu (D.ref: -20 dBFS, A.Ref: 0 dBu)
- +22dBu (D.ref: -18 dBFS, A.Ref: +4 dBu)
- +24dBu (D.ref: -20 dBFS, A.Ref: +4 dBu)
- (Note) D.Ref: Digital Reference Level, A.Ref: Analog Reference Level
- Output Impedance: Below 100 Ohms
- Digital Audio I/O
- Dante (Primary/Secondary) Redundant/Switched Compatible
- Connector: etherCON Cat5e Compatible Connector
- Transmission Protocol: Dante
- Number of Channels: 16 Channels In/Out
- Sampling Rate: 48 kHz, 96 kHz
- Ethernet Specification: 1000 BASE-T (IEEE802.3ab)
- Cable: CAT5e STP
- Other Inputs/Outputs
- GPIO
- Connector: D-sub 25-Pin Female Inch Screw
- Input Circuit: Pull-Up (5 V)
- Output Circuit: Open Collector
- Output Impedance: 10 Ohms
- Pressure Resistance: 20 V
- Maximum Current: 35 mA
- +5V Maximum Supply Current: 50 mA
- Mobile App Compatible
- Yes: iPadOS Only
- App Name: Sonicview Control
- Functionality: Adjust Settings, Remote Control, Setup, View Live Feed
- *As of January, 2023: Check with manufacturer for the most up-to-date compatibility
- Power Source: AC Input (Included)
- AC Input Power: 100 to 240 VAC, 50 / 60 Hz
- DC Input Power: 11 to 27 VDC at 2 to 4 A
- Power Consumption: 44 W
- Color: Black
- Dimensions: 17.9 x 7.1 x 5.5" / 454 x 179.6 x 140 mm (Standard Foot)
- Weight : 9.9 lb / 4.5 kg
Tascam SB-16D Downloads
Manual - As of 2/24/2023
Spec Sheet - As of 2/24/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
