TOA BG-235 3-Input 35-Watt 70-Volt Mixer/Amplifier

Info

TOA's BG-200 Series of mixer/amplifiers are ideal solutions for installations in restaurants, retail stores, lounges, classrooms and meeting rooms. Incorporating TOA's no-compromise technology, the BG-200 Series is designed to provide the high performance and audio quality with wide frequency response, low noise and distortion and stable output regulation.

The BG-235 offers a simple and cost-effective solution for adding powered zones to an existing system as well as powering speakers in applications that require a line input from a mix or playback source. Using the perfected amplifier technology and bullet-proof construction that has made TOA an industry standard, the BG-200 Series Mixer/Amplifier is designed to make sound projects affordable, reliable and easy to install.

The BG-200 Series Amplifiers are UL/cUL approved, competitively priced and backed by TOA's 5 year warranty.

Massive Power supply for high-quality, reliable sound.
All inputs and outputs on removable Euro-block connections for easier installation
35W, 15% higher power than previous model
3 Inputs:
- Mic/Line 1 w/ Balanced phoenix input and Manual Mute Trigger
- Line 2 w/ Phoenix & RCA summing connector
- Line 3 w/ Phoenix & RCA summing connector
Input 1 selectable between Mic/Line input level.
MOH/Zone2 balanced line output assignable via rear-panel dip switches. Selects any or all three input channels-no muting. Can be used for Music on Hold or 2nd Zone
- Mute receive assignable for channels 2 & 3 on rear-panel dip switches.
Mute can be activated via "VOX" or "Contact In" signal.
Mute Sensitivity and MOH/Zone 2 are both level adjustable.
Power outputs available at 4 Ohm, 25V & 70V for more system flexibility
Unbalanced Line Output can be used for an extra zone or for recording.
Dedicated Bass & Treble controls (recessed on front panel) allow independent adjustment for main output.
Thermal Overload Protection circuit with rear panel reset breaker.
Input Signal present, Peak & Power On indicators on front panel.
Supplied security caps (YA-920 x 3) for volume knob to prevent unauthorized adjustment.
UL/cUL Listed
Five Year Warranty

Power Source 120 V AC, 60 Hz
Rated Output 35W
Power Consumption 90 W (rated output), 55 W (based on cULus standards)
Frequency Response 50 Hz - 20k Hz
Total Harmonic Distortion 0.5% or less, at 1 kHz, rated output
Input
- Mic.: -60 dB*/Line 1: -10 dB*
- Mic/Line 1 selectable, 600 ohms, electronically balanced, removable terminal block
- Line 2, 3: -10 dB*, 10 k ohms, unbalanced, removable terminal block or RCA jack
Output
- Speaker 4 ohms, 25 V (18 ohms) and 70 V (140 ohms) balanced, removable terminal block
- MOH 0 dB*, 600 ohms, balanced, removable terminal block
- Line 0 dB*, 600 ohms, unbalanced, removable terminal block
Output Regulation 2 dB or less, no load to full load (1k Hz)
S/N Ratio Mic/Line 1: 60 dB or more/Line 2, 3: 80 dB or more (Band Pass: 20 Hz - 20k Hz, Tone Controls: Centered)
Tone Control Bass: +/-10 dB at 100 Hz, Treble: +/-10 dB at 10k Hz
Control
- Mic/Line 1 gain control, Line 2 gain control, Line 3 gain control, Bass tone control, Treble tone control,
- MOH out gain control, Mute control (Manual mute), Mute sense control,
- Auto mute switch (Mic/Line 1), Mic /Line 1 selector switch, Mute receive switch (Line 2, 3),
- MOH assign switch (Mic/Line 1, Line 2, 3), Power ON/OFF switch
Indicator Power LED, Signal level LED, Peak LED
Other Feature Automatic electronic drive limiter
Operating Temperature 0°C to 40 °C (32°F to 104 ºF)
Operating Humidity 35 % to 80 % RH (no condensation)
Finish Panel: ABS resin, black/Case: Steel plate, black, paint
Dimensions 210 (W) × 94.3 (H) × 265 (D)mm (8.27" × 3.71" × 10.43")
Weight 4 kg (8.82 lb)