The EMX5 was designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.
Box-type robust and portable powered mixer featuring high efficiency power amplifier of 630W and mixer with comprehensive effects, 1-Knob Master EQ™ and built-in feedback suppressor.
- 2x 630W [4 ohms], 2x 460W [8 ohms] (1kHz THD+N less than 10% CEA2006)
- 2x 500W [4 ohms], 2x 370W [8 ohms] (1kHz THD+N less than 1% CEA2006)
- Powerful & High Efficiency Class-D Amplifier
- 12 Line Inputs (8 mono + 4 stereo)
- High-Z input (channel 4) to connect guitars or basses directly
- 1-Knob Master EQ™
- Onboard Feedback Suppressor
- Comprehensive, professional 24 different effects
- Metal chassis for extended operation and robustness
- Large handles for extreme portability and protection
- Universal power supply eliminates concern on power fluctuations
- Optional rack-mount kit available
- I/O
- Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE) TOTAL 12 channels
- Phantom power +48 V
- Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
- Control and others FOOT SWITCH : Effect Mute on/off
- Bus Stereo: 1, AUX: 2 (Including FX)
- Input Channel Function
- PAD 30 dB (CH1-4)
- Hi-Z Supported (CH4)
- HPF 80 Hz, -12 dB/oct. (CH1-3)
- COMP 1-knob COMP (CH1-4)
- EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
- EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
- EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
- On-board processors DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
- On-board amplifiers
- Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
- Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
- Level Meter 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
General specifications
- Frequency response Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz), refer to the nominal output level @ 1 kHz
- Total harmonic distortionInput to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
- Hum & noise level
- Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
- Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
- Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter)
- Protection circuit
- Load protection DC-fault
- Amplifier protection Over heat protection, Over current protection, Integral power protection
- Power supply protection Over heat protection, Over current protection
- Power requirements AC 100-240V, 50Hz/60Hz
- Power consumption 42 W (Idle) / 210 W (1/8 Power)
- Dimensions W 465 mm (18 5/16") x308 mm (12 1/8") xD 325 mm (12 13/16") 325 mm (12 13/16")
- Net weight 9.5 kg (20.9 lbs)
- Accessories Owner's Manual, Technical Specifications, AC power cord (2.5 m)
- Options Foot switch: FC5, Rack-mount brackets: RK-EMX7x
- Others Operating Temperature : 0 to +40