The Synergy Array Series is a truly revolutionary active point source system with unmatched flexibility, power, and directivity control. The Synergy System offers users unrivaled simplicity without sacrificing sonic performance.

The Synergy Array Series consists of the SA153 full-range powered cabinet, along with the SA315S powered subwoofer. This dynamic duo makes the ultimate point source speaker system scale-able for club gigs of all sizes, outdoor festivals, inclined seating venues, and arenas. Never before has a large point source system with this much output and sound quality been this easy to set up and use.

Paraline Lens Technology
The unique geometry of the patented Paraline Lens is capable of producing a precisely shaped wave front that matches the horn's physical coverage pattern. It does this while providing a continuous horn throat from cabinet to cabinet on the horizontal plane. This virtually eliminates the comb filtering usually associated with traditionally arrayed cabinets. The Paraline Lens is fed by a high output mid-high driver which results in seamless coupling and a matching coverage pattern.

Synergy Horn Technology
The Synergy Horn configuration of the Paraline Lens coupled with a single 15-inch high output woofer seamlessly couples the output from both drivers while performing as a true point source. The horn utilizes the entire front area of the cabinet maximizing efficiency and directivity control.

• 3-way full-range powered speaker: 2600 watts (program), 5000 watts (peak)
• 1 x 15-inch LF woofer, 1 x MF/HF Co-ax Compression Driver
• Incorporates Tom Danley's patented Paraline Lens and Synergy Horn technologies
• Exceptionally high output and pristine clarity
• Simple and secure rigging hardware
• Extremely well controlled coverage pattern
• Measured MAX SPL (C-Weighted, Max Hold): 131dB continuous, 137dB Peak
• Frequency Response (Hz +/- 3db): 55Hz-18K
• Dispersion (°H x °V): 22.5° x 45° (Asymmetrical 10° Up, 35° Down)
• Audio Inputs: 1 XLR, 2 x XLR Loops
• AC Connections: 1 In, 1 Loop (Locking Powercon)
• Dimensions (DWH x backW, inches): 24 x 21 x 26.5 x 12.25
• Made in Canada

Active or Passive: Active
Program Power (Watts): 2600 Watts Program (5000 Watts Peak)
Biampable: Triamp
Measured Max SPL (C-Weighted, Max Hold): 131 dB Cont. 137 dB Peak
Frequency Response (Hz +/- 3dB): 55Hz-18k
Dispersion (°H x °V): 22.5x45 Asymetrical 10 Up, 35 Down
Crossover Frequency (Hz): 400Hz, 7kHz
Cabinet Configuration: Patented Synergy Horn and Paraline Lens Technology
Driver Configuration: 1x15" LF woofer, 1x MF/HF Co-ax Compression
HF Driver(s): 1.75" Diaphragm/Voice Coil Annular Co-axial
HF Program Power (Watts): 300 Watts
HF Impedance (Ohms): 16 ohm Load
HF Protection: Peak and Average Limiting
MF Driver(s): 3.5" Diaphragm/Voice Coil Annular Co-axial
MF Program Power (Watts): 300 Watts
MF Impedance (Ohms): 16 ohm Load
MF Protection: Peak and Average Limiting
LF Driver(s): 1x15" Neo Woofer with 3.5" Voice Coil
LF Program Power(Watts): 2000 watts Program (4000 watts Peak)
LF Impedance (Ohms): 8 ohm Load
LF Protection: Excursion, RMS
HF Power Amplifier (Watts): 300W
HF Amplifier Type: 3-Tier Class H
MF Power Amplifier (Watts): 300W
MF Amplifier Type: 3-Tier Cllass H
LF Power Amplifier (Watts): 2000W
LF Amplifier Type: Class D
Cooling Scheme: Convection
Power Cable: Removable Locking Powercon True Input and Loop Thru Output
Power Switch: Yes
Power Consumption (typ/max): 220 VA / 400 VA
Inputs: 1 XLR, 2 x XLR Loop
Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max
Level Controls: Volume
EQ Controls: HF/MF Boost select,
Fullrange/Sub switch
LED Indicators: Power, Limit, Clip
Enclosure Materials: Multiply 15mm Birch Plywood
Standard Rigging Hardware: RAIL and LOCKBAR Rigging System (Top and Bottom)
Stacking Feature: Interlocking UHMW Feet (Top and Bottom)
Covering / Finish: Paint
Dimensions (DWH xbackW, inches): 24 x 21 x 26.5 x 12.25
Dimensions (DWH xbackW, cm): 60.9 x 53.3 x 67.3 x 31.1
Weight (lbs/kg): 115/52.1