Ace Backstage 122CL Full Pocket with Carpet Lid (Black or Coppervein)

$244.19 - $247.74
SKU:
122CL

Please note: Due to the large difference in pricing and shipping, you may contact us if you're looking to get this in the other options ACE offers, such as: Brass Bezel, Stainless Steel Bezel, Locking Lid w/ Butterfly Lock, Locking Lid w/ Flat Head Lock, Flush Flange/Carpet Lid, and more.

ACE BACKSTAGE large-sized Stage Pocket, the Full Stage Pocket, is a standard general use vertical slant panel flush stage pocket. The Full Stage Pocket is made of heavy duty steel and may be utilized to conceal audio, communications, control, data, electric AC power, switches, video, and other relevant connections below the floor surface for easy access and to prevent connector damage. The Full Stage Pocket has a larger capacity inter-changeable panel system which permits efficient and easy custom connector/panel configurations.

The Full Stage Pocket has the panel capacity for either: (2) #PNL-100 Series CONNECTRIX Panels or 2) #PSW-100 Series Switchcraft® Panels or (2) #PE Series Single Gang Electric Duplex Switch Box Panels or (1) #PNL-120 Series CONNECTRIX Panel.

The Full Stage Pocket has the connector capacity for either: (12) CONNECTRIX Connectors or (12) Neutrik® Connectors or (12) Switchcraft® Connectors or (6) CONNECTRIX, Neutrik®, or Switchcraft® Connectors and (1) #PE Electric Duplex Switch Box.

Utilizing ACE's CONNECTRIX System will allow mounting of up to 12 CONNECTRIX, Neutrik®, Switchcraft®, and/or Custom Connectors in the Full Stage Pocket. All ACE Full Stage Pockets are welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange and a 16 ga. (.062") thick Pocket Body. The Full Stage Pocket resists bending under even the most severe stage loads.

Removable spring loaded hinge pins permits easy exchange of lids for carpet lids, locking lids, standard lids, and other custom application lids. A generous cable way slot of 3/8" x 8" permits easy cable exit from the stage pocket, even for large gauge cables. A cableway slot closure channel closes the slot when not in use. The Full Stage Pocket has an easy installation into 8.5" x 8.5" cutout in the stage floor. Open easy access from top or back of the Full Stage Pocket to connector panels makes for easy installation.

A scratch/wear resistant finish, oven cured powder coat is applied in an electrostatic manner inside and outside the entire Stage Pocket. Decorator neutral Antique Copper Vein or Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange are also available by special order. The Full Stage Pocket's solid rubber Lid Stops cradle the lid to prevent lid rattle.

• Full Stage Pocket Body Size = 8.000” W x 3.500” H x 7.187” D
• Full Stage Pocket Lid & Mounting Flange Size = 10.500” W x 1.000” H x 10.500” D
• Full Stage Pocket Connector Capacity = Up to 12 CONNECTRIX, Neutrik®, or Switchcraft®
• Full Stage Pocket Cutout Dimensions = 8.500" W x 8.500" H
• Full Stage Pocket Material = CRS Steel and/or Solid Half Hard Brass
• Full Stage Pocket Panel Capacity =
• (2) #PNL-100 Series CONNECTRIX Panels OR
• (2) #PSW-100 Series Switchcraft® Panels OR
• (2) #PE Series Single Gang Electric Duplex Switch Box Panels OR
• (1) #FP3E Series Triple Gang Electric Duplex Switch Box Panel OR
• (1) #PNL-120 Series CONNECTRIX Panel