Allen & Heath ME-U 10-Port PoE Monitor Hub

MSRP: $1,999.00
(You save $200.00 )
Support Documentation:
Brochure_Allen and Heath_ME-U.pdf

Allen & Heath'sME-U is a touring grade, 10 port PoE hub providing power and audio to connect multiple ME-1 personal mixers. It comes with a standard input card to interface with GLD dSnake, iLive ACE or Aviom® A-Net®, which can be replaced with a MADI, Dante or EtherSound card to take a digital feed of up to 40 sources from third party systems.

  • 10 ports with locking Ethercon connectors
  • Daisy chain for more outputs - up to 19 ME-1s with 2 hubs
  • Each port provides power + 40 audio sources to connected ME-1s
  • Touring grade build quality
  • 2U rack or desk mounting
  • Multi-purpose Network port:

Connect PC or Mac for ‘web page' setup of unit name and IP address, and manual entry of channel names

Connect iLive AH-Net network to pick up channel names automatically from an iLive system.

  • Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
  • Outputs: 2x Stereo (Line or Headphones), Mono Line Out
  • Input Control: Level, Mute, Pan, Solo, Trim All
  • Master Control: Level, Mute, 3-band EQ, Limiter
  • Group Control: Level, Mute, Level/Pan for sources within Group
  • Groups: 16, Up to 40 sources assignable
  • Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
  • Config: Stores Setup and all Presets
  • Names: Channels, Keys, Unit, Presets, Config
  • USB Data Port: Individual Presets or Config transfer, Firmware update
  • Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
  • Stereo Out:

    • Stereo 1/4" and 3.5mm Jacks
    • Headphones 300mW+300mW into 100 Ohm load
    • Max +21dBu
  • Mono Output:

    • Balanced TRS Jack
    • Nominal 0dBu, Max +18dBu
  • Aux Input:

    • Stereo 3.5mm Jack
    • Nominal -8dBu, Max +10dBu
    • Input Impedance >10kOhm
  • AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
  • Residual Output Noise: -95dBu (Level down, 20-20kHz)
  • Frequency response: +0/-1dB 10Hz to 20kHz
  • Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
  • Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
  • Dimensions: 8.9" W x 5.9" D x 2.2" H (225 x 150 x 55mm)
  • Weight (including phones hook): 2 lbs (900g)