The MB300 is used in conjunction with the MB200 installation bracket to create a speaker array. The array can be constructed in either of two angular configurations:
- Speaker side by side (50' angle) for a tight array
- Speakers spread slightly (60' angle) for wider coverage. Note that a full 360' array can only be accomplished with the 60' angle pattern.
Suspension of the speaker array is made easy with the four 12.7-mm (0.5") holes located on the MB300. A cable, chain quick link, or other suitable hardware which is rated for overhead lifting(not supplied with this kit) can be used to connect the array for flying.
- Suspension Holes
- 4(four) 12.7-mm (0.5") in diameter
- MB300 Mounting Holes
- 4(four) 8-mm (5/16") in diameter
- Material
- 10-gauge cold-rolled steel
- Finish
- Wrinkled powder coat
- Net Weight
- 8.0lb (3.63kg)
- Shipping Weight
- 9.0lb (4.08kg)
- 2 (two) brackets
- 8(eight) 5/16-18x1 hex-head bolts
- 8(eight) 5/16 lock washers
- 8(eight) 5/16-18 nuts
