Furman CN-15MP MINIPORT 15-Amp AC Power Relay

Product Price MSRP: $354.95
$349.95
(You save $5.00 )
No reviews yet Write a Review
SKU:
CN-15MP
Shipping:
Calculated at Checkout
Stock Status:
In Stock
Adding to cart… The item has been added
Add to Wishlist

SmartSequencing Power From Furman

The Furman CN-15MP Contractor Series MiniPort offers great flexibility for electronics installations outside of the equipment rack, with multiple units daisy-chained and controlled via a Furman SmartSequencer, legacy Furman sequencer, or third-party sequencer

DIP switches and potentiometers allow you to customize your sequencing settings, such as sequencing delays, 12V on/off, and more. The security covers are provided to prevent unauthorized personnel from tampering with the DIP switches. The sequencing of duplex can be initiated remotely by standard analog triggering (remote terminal) or digital link (SmartSequencing from the CN-1800S or CN-2400S Bi-directional Sequencers; sold separately). The CN-15MP can shut itself off automatically when triggered by a fire alarm.

SmartSequencing

SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key.

Voltage Protection

Extreme Voltage Shutdown (EVS) safeguards from catastrophic under-voltage (under 80V sustained) or over-voltage (over 145V sustained) conditions. The EVS feature can be selectively enabled or disabled according to the preference of the user.

BlueBOLT Compatible

IP Control is possible (Telnet or cloud-based BlueBOLT) via SmartSequencing (when connected to CN-1800S/CN-2400S Bi-directional Sequencers with BB-RS232 Adapter).

Diagnostic Lights

Diagnostic lights provide valuable system information including power quality.

Output Current (15A)

The MiniPort has a 15A maximum current capacity with an incorporated 15A thermal circuit breaker.

DIP Switch Customization

DIP switches and potentiometer allow customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.

Furman CN-15MP Features

  • The MiniPort provides AC control for equipment located away from system racks with primary power conditioners/sequencers (i.e., powered speakers).
  • Sequencing of duplex is initiated remotely by standard analog triggering (remote terminal) or digital link SmartSequencing from CN-1800S or CN-2400S Bi-directional Sequencers).
  • SmartSequencing Technology allows multiple units to be daisy chained at runs of over 1,000’ (304.8m) between units with bi-directional communications between units for sequencing on and off large and/or complex systems.
  • EVS (Extreme Voltage Shutdown) safeguards from catastrophic under-voltage (under 80V sustained) or over-voltage (over 145V sustained) conditions. Circuit may be set to auto-reset when voltage returns to normal or manual reset after an event is detected.
  • Fire alarm shut off; 15A capacity; safety agency listed (CSA) and RoHS compliant

 

  • AC Voltage Input Range: 90-139VAC, 50/60Hz
  • Maximum AC Current Rating: 15 amps (Thermal breaker)
  • AC Cord: 3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug
  • AC Receptacles: 2 NEMA 5-15R’s (1 duplex)
  • AC Undervoltage Protection: EVS, 77VAC+/-3VAC
  • AC Overvoltage Protection: EVS, 140VAC+/-5VAC
  • AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)
  • Operating Temperature Range: 5C (40F) to 40C (105F) degrees
  • Humidity Range: <90% rH (Relative Humidity)
  • Circuit Breaker: Pushbutton, 15A
  • Front panel diagnostic indicators: (LED) Power, Extreme Voltage, Primary Link, Secondary Link
  • Side Panel DIP Switch Features (with security cover): 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
  • Side Panel: Potentiometer allows fine tune delay adjustments
  • Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
  • SmartSequencing: Phoenix-type 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
  • Remote Termina:l Phoenix-type 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY_OUT (Class 1 Wiring)
  • Force Off Phoenix-type 2-Pin Connector With Screw Terminals, FORCE OFF (Class 1 Wiring)
  • RS-232 Compatible: Yes, indirectly, when connected via SmartSequencing to a Furman Smart Sequencer with an RS-232 port
  • IP Accessibility: Optional IP control via Telnet, HTTP, or BlueBOLT® when used in conjunction with SmartSequencing
  • Voltmeter: Available with SmartSequencing Ethernet option, ± 2VAC accuracy
  • Ammeter: Available with SmartSequencing Ethernet option, ±1A accuracy
  • Power Consumption: (No Load) 10 Watts
  • Safety Agency: CSA, RoHS Compliant

Furman CN-15MP Downloads

Manual - As of 12/20/2022
Spec Sheet - As of 12/20/2022



Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.

You may also like