Streamlined For Performance. Consider it 4 DI Boxes In One.
Many performing multi-instrumentalists send each instrument to a separate channel on the PA system, allowing for individual levels, EQ and effects settings. This usually requires multiple DI boxes and instrument cables, creating a cluttered stage that can be difficult to manage.
The 4-Play only requires you to connect one cable to the pedal's input, and it has four DI outputs to feed your PA system. Not only does this mean fewer cables on stage and less equipment to monitor, but it eliminates the need to notify the sound engineer if you need to change instruments during a performance. 4-Play streamlines your setup and approach.
Radial 4-Play Features
- Quick changeovers for multi-instrumentalists
- Switch between four DI outputs using a single footswitch
- Shared tuner output & mute footswitch
- Ground lift switches to eliminate hum and buzz
- Audio circuit type: Classic Class-A FET input with balanced audio grade opamp output
- Number of channels: 4
- Frequency response: 20Hz - 20kHz
- Dynamic range: 113dBu
- Gain: 0dBu
- Clip Level: +13dB
- Total harmonic distortion: 0.03%
- Intermodulation Distortion: 0.02%
- Phase Deviation: -0.12° @ -20dBu / 1kHz
- Input Impedance: 10M Ω
- Output Impedance: 5.4K Ω
- Noise Floor: -100dBu
- Maximum Input: +8dBu
- Ground lift
- Input Connectors: 1/4"
- Output Connectors: 4x XLR
- Extras: Tuner output
- Construction: 14-gauge steel chassis & outer coat
- Size (L x W x D): 5" x 4.7" x 2"
- Weight: 2lb
- Power: 9V Adaptor / 80mA center pin negative
- Conditions: For use in dry locations only between 5°C and 40°C
Radial 4-Play Downloads
Manual - As of 3/16/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
