Radial CATAPULT RX4L 4-Channel Cat5 Audio Snake Receiver Module w/ Line-Level Transformer

Product Price MSRP: $348.00
$289.99
(You save $58.01 )
No reviews yet Write a Review
SKU:
CATAPULT RX4L
UPC:
676101044405
Shipping:
Calculated at Checkout
Availability:
This product requires extra processing and shipping time, please allow an extra 3 business days for processing.
Stock Status:
Usually ships quickly from Manufacturer
Adding to cart… The item has been added
Add to Wishlist

Secure Your Audio Connection Around Large Stages and Venues

Designed for use with the TX4L, the Radial Engineering Catapult RX4L is a snake that takes 4 channels of line level signals over Cat5/Cat6 cables and routes them to the 8 attached XLR jacks. Four of the XLR channels are direct outputs and the remaining four are isolated. This device is useful for live sound reinforcement applications as it allows live sound stage technicians to ensure high quality audio connections on large stages and venues using relatively inexpensive cables. Also suitable for system providers who can use Catapult in pre-wired networks to transmit audio in different rooms.

In addition to his XLR connector from Catapult, there are two RJ45 EtherCON connectors. One is a multi-channel input for use with the TX4L on the transmit side. Another is throughput, which can be implemented when routing signals to additional catapults.

Three different possible destination paths through the XLR bank and etherCON throughput allow audio to be split to multiple sources as needed. A ground lift switch helps eliminate noise problems on Cat5/Cat6 lines. A steel handle also makes it easy to carry, and four bumpers protect the Ethernet jack and ground lift switch from wear and tear.

Radial Catapult RX4L Features

  • Glass-filled, nylon XLR connectors
  • Nickel-silver contacts will not tarnish over time
  • Minimal signal degradation over long cable runs
  • Low-noise and flat frequency response
  • 4 x XLR through-outputs with line-level transformer isolation for additional routing
  • 1 x Ethernet through-output for feeding additional Catapult models
  • Protective steel handle facilitates convenient transportation
  • Durable powder coat
  • Ground lift for the Cat5 cable’s ground path to mitigate ground-loop noise
  • 4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage
  • Double-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference
  • Radial push switches with durable metal outer casing, rated at over 20,000 cycles
  • Audio Circuit Type: Passive linesplitter, transformer based
  • I/O:
    • 8 x XLR outputs (2 banks)
    • 1 x RJ45-type etherCON input
    • 1 x RJ45-type etherCON through-output
  • Frequency Response: 7 Hz to approximately 20 kHz
  • Total Harmonic Distortion: 0.0007% at 1 kHz
  • Dynamic Range: 140 dB
  • Maximum Input : +35 dBu
  • Minimum Load Impedance: 100 Ohms
  • Common Mode Rejection: > 113 dB
  • Ground Lift: Disconnects ground on RJ45 connector
  • Construction: 14-gauge steel chassis and outer shell
  • Finish: Durable powder coat
  • Dimensions: 8.1 x 4.1 x 2.0" / 20.6 x 10.5 x 5.1 cm
  • Weight: 2.6 lb / 1.2 kg

Radial Catapult RX4L Downloads

Manual - As of 3/21/2023



Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.

You may also like