Radial PRORMP Passive Re-Amplifier

Product Price MSRP: $156.00
$129.99
(You save $26.01 )
No reviews yet Write a Review
SKU:
PRORMP
UPC:
676101036783
Shipping:
Calculated at Checkout
Availability:
This product requires extra processing and shipping time, please allow an extra 3 business days for processing.
Stock Status:
Usually ships quickly from Manufacturer
Adding to cart… The item has been added
Add to Wishlist

Professional Reamping For Any Studio

Radial Engineering's ProRMP is a passive reamplifier that allows an engineer or producer to take a pre-recorded guitar track, usually at line level, and send a guitar-level signal that can then be sent back to an amp/speaker or effects box. This opens the door to discovering new musical sounds and speeds up the creative process, as the device controls the guitar amp as if the instrument were still connected to it.

Using the device is easy. Once the basic track is recorded, tracks can be replaced or added even after the session player returns home. The dry recorded track is fed into the ProRMP and the output is sent back to the guitar amp or effects pedal. This eliminates tedious playback and ensures fresh, lively performance in the final recording.

For the live performer, the unit provides the impetus to record a second, dry track for future editing. Fixing an effects-laden track is almost impossible even with the best editors, while fixing a dry signal is easy. The treatment is then amplified again through the original guitar/effects loop and dropped back to the original track.

Radial PRORMP Features

  • Play pre-recorded tracks through amps and pedals
  • On board level control for fine tuning amp level
  • Transformer isolated to eliminate buzz and hum
  • Opens the door to creative new tones and textures
  • Audio circuit type: Passive, transformer isolated
  • Frequency response:20Hz - 20KHz (+0/-1dB)
  • Dynamic range: >137dB
  • Gain:>-10dB
  • Total harmonic distortion: 0.003%
  • Phase Deviation: 0.3° @ 100Hz; 5° @ 20Hz
  • Input Impedance: 1600 Ohms
  • Output Impedance: 1850 Ohms
  • Common Mode Rejection Ratio: 100dB @ 60Hz (unbalanced source)
  • Equivalent Input Noise: >-98dBu Noise plus gain
  • Noise: -111dBu
  • Maximum Input: >+26dBu
  • Input pad, 180° polarity reverse, Ground lift
  • Input Connectors: XLR
  • Output Connectors: 1/4"
  • Construction: 14 gauge steel chassis and outer shell
  • Size (L x W x D): 3" x 5.0" x 2" (84 x 127 x 48mm)
  • Weight: 55 lbs (720 g)
  • Power: Passive, no power required

Radial PRORMP Downloads

Manual - As of 4/5/2023



Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.

You may also like