Isolate and Remove the Hum and Noise
Radial Engineering's StageBug SB-6 Isolator is a 2-channel unit with 1/4-inch inputs and outputs for both Hi and Lo-Z signals, eliminating hum and hum caused by ground loops for various types of audio signals. Ability to convert Depending on the connectors used one to another. Its two linear Eclipse transformers are designed for a flat response from 20Hz to 20kHz and give you a phase-inversion switch for phase alignment of stereo signals and -15dB pad.
Radial SB-6 Features
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
- Audio circuit type: Passive Transformers
- Transformer: Eclipse Custom
- Frequency response: 20Hz-20KHz +/-1db
- Dynamic range: >140db
- Gain: -2dB
- Total harmonic distortion: <0.0008% @ 1kHz
- Phase Deviation: >5° @ 30Hz
- Input Impedance: Varies with Load/47K
- Output Impedance: 600Ω
- Maximum Input: >+25dBu
- Input pad, 180° polarity reverse, Ground lift
- Input Connectors: 1/4" TRS
- Output Connectors: 1/4" TRS
- Construction: 14 gauge steel chassis & outer shell
- Size (L x W x D): 92" x 2.54" x 1.7" (100mm x 65mm x 43mm)
- Weight: 9 lbs (408 grams)
- Power: Passive, no power required
Radial SB-6 Isolator Downloads
Manual - As of 4/10/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
