sE Electronics DM1-MIC-PRE-U Dynamite Active Inline Microphone Preamp with 28 dB Gain

MSRP: $149.00
$109.99
(You save $39.01 )
SKU:
DM1-MIC-PRE-U
Shipping:
Free Shipping

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impedance is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

Not Suitable for phantom-powered microphones (condensers, active ribbon mics).

Frequency Range: 10Hz - 120,000Hz (-0.3 dB)

Gain: 28 dB (load 1kOhms)

Max Output Level (0.5% THD): 8.3 dBV (2.6 V)

Output Noise Level: 9 μV (JIS-A)

Power: 48V  according to IEC 61938

Electrical Impedance: 135 Ohms

Recommended Load Impedance: >1K Ohms

Current consumption: 3.0mA

Connectivity: 3-pin male/female XLR connector

Dimensions: Diameter (0.75 in) Length (3.76 in)

Weight: 80g (2.82 oz)