A smooth exterior and recessed grille screen on the Shure SM11-CN Omnidirectional Dynamic Lavalier Microphone minimize clothing noise for clean, clear vocals.
The Shure SM11-CN is a miniature omnidirectional dynamic lavalier microphone designed for use in television broadcasting, sound reinforcement, certain radio and motion picture applications, and similar uses where a small, professional-quality microphone is required. The SM11 has an omnidirectional pickup pattern, and its frequency response is optimized for lavalier use. The microphone is supplied with a tie clasp assembly, tie tack assembly, connector belt clip, and zippered carrying bag.
- Acoustically matches most stand- or desk-mounted microphones
- Small and lightweight for unobtrusive, virtually unseen operation
- Smooth exterior and recessed grille screen minimize clothing noise
- Rugged aluminum case construction
- Extremely flexible long-life cable
- Two mounting options -- tie clasp or tie tack
- Convenient, secure belt clip attaches connector to belt or clothing
- Microphone Type: Dynamic
- Frequency Response: 50 to 15,000 Hz
- Polar Pattern: Omnidirectional
- Impedance: Microphone rating impedance is 150 ohms (200 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms
- Output Level (at 1,000 Hz):
- Open Circuit Voltage: -64 dBV/Pa (0.60 mV)
- (1 Pa = 94 dB SPL)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Hum Pickup: 35 dB equivalent SPL in a 1 millioersted field
- Cable: Non-detachable, 1.2 m (48 in.), two-conductor, shielded, plastic-covered
- Connector: Professional three-pin audio (XLR)
- Net Weight: 7.9 grams (0.28 oz), less cable and connector
FCC Consumer Alert This disclosure informs consumers that wireless microphone users must cease any wireless microphone operations in the 600 MHz service band no later than July 13, 2020. In addition, in many instances they may be required to cease use of these devices earlier if their use has the potential to cause harmful interference to 600 MHz service licensees’ wireless operations in the band. Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website. |
