The compact, 2U rack-mount TASCAM MZ-223 offers five audio channels, each with a dedicated gain potentiometer and two stereo sets of RCA line-level inputs (ten RCA inputs, total), that can be mixed, segregated, and routed to three independent zones or destinations. Channels 1 and 2 can also accommodate phono-level signals for use with a turntable, making the MZ-223 suitable for DJ and residential applications. Two convenient front-panel, balanced XLR inputs handle microphone signals. 

Each of the MZ-223's three stereo output zones present balanced XLR and unbalanced RCA line-level outputs, enabling long cable runs or connection to residential power amplifiers or powered speakers. A slider switches the RCA outputs between 0.75V and 1.5V. The MZ-223 also provides stereo unbalanced RCA master Record outputs, switchable for use with or without microphones, that enable recording the main mix to an external recording device for capturing events. With the MZ-223's flexible design, for example, you could route music to Zone 1, ambient noise or natural sounds to Zone 2, and a separate music track or a voice announcement to Zone 3. The front panel also includes a ¼-inch stereo headphone output with level control.

A generous assortment of front-panel volume sliders, routing switches and buttons, EQ knobs, and mute buttons enable simple, fast setup and operation. A Talkover function automatically lowers other source levels when microphones are in use.

• Easy operation and routing via familiar volume sliders, toggle switches/buttons, and knobs
• Three independent Zone outputs with stereo XLR balanced and unbalanced RCA-type connectors per channel
• Five separate input channels, each with two sets of stereo RCA-type inputs
• Two additional mic-compatible XLR inputs on the front panel
• All audio can be mixed or segregated per channel, and routed to the three separate
• Zones/outputs
• “Talkover” function automatically lowers other source content while microphones are in use
• Independent three-band EQ per output channel and per microphone input
• Compact 2U rack mount design

Audio inputs 

MIC 1–2 INPUT (BALANCED) jacks

Connectors                          XLR-3-31 (1 GND, 2 HOT, 3 COLD)

6.3mm (1/4”) standard TRS jacks (Tip HOT, Ring COLD, Sleeve GND)

Input impedance                   33 kΩ

Nominal input level              -65 dBu (VOLUME knob at MAX)

Nominal input level              -10 dBu (VOLUME knob at MIN)

Gain range                           55 dB

INPUTS LINE (UNBALANCED) jacks

Connectors                           RCA pin jacks

Nominal input level              -10 dBV

Maximum input level             10 dBV

Input impedance                    22 kΩ

Audio outputs 

MAIN OUTPUTS (UNBALANCED) jacks

Connectors                           RCA pin jacks

Rated output level                -10 dBV

Maximum output level            6 dBV

Output impedance                200 Ω

MAIN OUTPUTS (BALANCED) jacks

Connectors                           XLR-3-32 (1 GND, 2 HOT, 3 COLD)

Rated output level                4 dBu

Maximum output level           24 dBu

Output impedance                200 Ω

MONITOR OUT jacks

Connectors                           RCA pin jacks

Rated output level                -16 dBV

Maximum output level           0 dBV

Output impedance                200 Ω

PHONES jack

Connectors                           6.3mm (1/4”) standard stereo jack

Maximum output                    50 mW + 50 mW (into 32 Ω load)

Audio performance  

Frequency response

20 Hz–20 kHz

Distortion

0.03% or less

Crosstalk

65 dB

General  

Power

Dedicated AC adapter (PS-M1524)

Input voltage                                    AC 100–240V ~, 50/60Hz

Output voltage                                  DC 15V

Output current                                   2.4 A

Power consumption

35 W

Dimensions

482.0 (19”) × 88.0 (3 1/2”) × 93.2 mm ((3 5/8”) (width × height × depth, including protrusions)

Weight

2.5kg (5.5 lb)