Yamaha MTX3 DSP 26x8 Zone Matrix Processor with YDIF Interface

Info

Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system's design, MTX processors allow you to configure, program, and manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.

26 x 8 Matrix Mixer / Signal Processor
8ch mic/line input and 8ch analog output
16ch YDIF digital I/O
SD Card Slot for playback

Memory bank PRESET: 50
Mixing Capacity
- Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix
- Output Busses : 8 Mono
Input Channel Functions
- Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)
- Stereo CH: 3-band PEQ, Comp, Auto Gain Control
Output Channel Functions Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter
Internal Processing Priority Ducking, Ambient Noise Compensator
Sampling frequency rate 48kHz/ 44.1kHz
Signal delay Less than 2.5ms (AD-DA @48kHz)
Total harmonic distortion*1 Less than 0.05% (+4dBu, Gain:-6dB), Less than 0.1% (+4dBu, Gain:+66dB)
Frequency response 20Hz to 20kHz, +0.5dB, -1.5dB
Dynamic range 107dB (Gain:-6dB)
Hum & noise level(20Hz to 20kHz), Rs=150 ohms -60dBu (Gainï1/4š+66dB), -83dBu (Gainï1/4š-6dB)
Phantom Power +48V
Crosstalk (@1kHz) -100dB
Heat diffusion 43kcal/h max
Power requirements AC100V-240V 50Hz/60Hz
Power consumption 50W
Dimensions W 480mm (18.9") 480mm (18.9") xH 44mm (1.7") 88mm (3.4") xD 362mm (14.3") 351mm (13.9")
Weight 4.8kg (10.6lbs) 6.3kg (13.9lbs)