The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The receiver can select from stereo, mono from left channel only, or mono from right channel only, giving the unit flexibility in terms of the application. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other environments with significant background noise. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.
- IEM (Wireless Monitor) receiver with digital RF
- 24-bit digital audio
- IR (infrared) port for fast setup
- High resolution, color LCD
- Stereo or mono operation
- Low latency of 1.4 ms with analog inputs
- Operating Spectrum: 470.1 - 607.975 MHz
- Modulation Type: 8PSK with Forward Error Correction, spread spectrum
- Occupied Bandwidth: 200 KHz
- Audio Sampling: 32 KHz; 24-bit sampling
- Latency:
- Digital Source: 1.0ms
- Analog Source: <1.4 ms
- Selectable Audio Inputs: 4 analog audio ins or Dante
- Audio Performance:
- Frequency Response: 20Hz - 15 KHz, - 3dB
- THD+N: 0.15% (1kHz @ -10 dBFS)
- Dynamic Range: >95 dB weighted
- Adjacent Channel Isolation >85dB
- Diversity Type: Switched antenna
- Audio Output: Earphone: 250 mW at 32 Ohms
- Power requirements: 2 x AA batteries (3.0V)
- Battery life: 7 hours; (2) Lithium AA
- Power consumption: 1 W
- Dimensions: Height: 3.0 in. / 120 mm. (with knob)
- Width: 2.375 in. / 60.325 mm.
- Depth: .625 in. / 15.875 mm.
- Weight: 9.14 ounces / 259 grams (with batteries)
