Connect To Dante With Ease
Need to connect your smartphone, tablet, or any playback device to your Dante network? How about an electric guitar while still connecting to your amp on stage? Radial's Dan-TX can do it all. With signal processing up to +24 dB, you can even plug the mixer's line-level output into the Dan-TX without breaking a sweat. A local level control lets you adjust as needed. With a wide variety of input connectors, you won't have to hunt for adapter cables at critical moments. Regardless of the source you're using, Dan-TX is the easiest way to connect analog audio to your Dante network.
Radial DiNet Dan-TX Features
- Stereo analog input device for Dante networks
- Connect instruments or line level sources
- 1/4", RCA and 3.5mm stereo TRS inputs
- 24bit/96kHz analog to digital conversion
- ADC: 2-channel
- Sample Rates: Up to 96 kHz
- Analog Inputs:
- 2 x 1/4" (L/R pair)
- 2 x RCA (L/R pair)
- 1 x stereo 1/8" (3.5 mm) TRS
- Digital Outputs: RJ45 (8-pin Ethernet)
- Maximum Input Level: +24 dB
- Controls:
- Trim
- High-pass filter
- -20 dB pad
- Line/Inst switch
- Power Requirements: 15 VDC power adapter or PoE (Power over Ethernet)
- Construction Material: 14-gauge steel
- Dimensions: 3.3 x 5 x 2" / 84 x 127 x 48 mm
- Weight 6 lb / 0.7 kg
Radial DiNet Dan-TX Downloads
Manual - As of 3/23/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.