Reliability For Backing Tracks
For any performance that includes backing tracks or other pre-recorded elements, reliability is critical to ensure smooth operation. Unfortunately, smart batteries die, laptops freeze, and Murphy's Law always applies. Backtrack creates a redundancy system that ensures you can immediately switch to a backup device if there is a problem with your primary playback source. This can be easily done with the push of a button on the Backtrack or the JR-2 footswitch on the remote control, giving you peace of mind and freeing you to focus on your performance without worry.
Radial Backtrack Features
- Switch between two stereo backing track sources on stage
- Easily connect playback devices with 1/4" and 3.5mm TRS jacks
- Headphone output for silently cueing up tracks
- Transformer isolated main outputs eliminate hum and buzz
- Audio circuit type: Passive Audio Circuit with Active Headphone Amplifier
- Number of channels: 2
- Frequency response: 20Hz - 20kHz (-0.5dB/+0.5dB)
- Dynamic range: >+130dBu
- Total harmonic distortion: 0.007% @ 0dBu, 1kHz
- Intermodulation Distortion: 0.02% @ 0dBu, 1kHz
- Common Mode Rejection Ratio: 34dBu @ 60Hz, 42dBu @ 3kHz
- Noise Floor: -105dBu
- Maximum Input: >+25dBu
- Ground lift, Headphone
- Input Connectors: 1/4" TRS, 3.5mm, RCA
- Output Connectors: XLR, 1/4" TRS
- Extras: Headphone output
- Construction: 14-gauge steel chassis
- Size (L x W x D): 6" x 5.9" x 1.9" (11.7 x 15 x 4.8cm)
- Weight: 2 lb (1kg)
- Power: 15VDC 100mA
- Conditions:For use in dry locations only between 5°C and 40°C
Radial Backtrack Downloads
Manual - As of 3/16/2023
Product documents are provided as a courtesy and may not reflect the most up-to-date information. Please contact us for the most up-to-date information.
